iLAVENDER-OS KEY can configure the required underlying communication protocol to realize the communication between the profound of the device and the PC and achieve the profound data modification
Never an architect, from the times of truth something born of hard work, but just the great sayings happen to our hates forgiveness provide pleasure
Features i LAVENDER-OS KEY:
- Automatic enter purple mode without a computer
- Free Software provides and free update
- Upgrade iPad models freely
- Upgrade software automatically
- No Need to remove NAND for 7/7P/8/8P/X when removing and changing the IC kit
- Replace 6S/6SP/7/7P/8/8P/X WiFi, unpack WiFi data without NAND removal
- iPad Mini 4 / Air 2 / iPad 5 (2017) / iPad 6 (2018) / iPad Pro (10.5) / iPad Pro 2 (12.9) WiFi Unlock
- ( If 3G, first change to Wifi version, then Unlock )
- SE/6/6P/6S/6SP/7/7P/8/8P/X Save Information or Unlocking Moving Plate,
- When changing the chipset, you can read and write data with Magico Diag Tool without removing the hard disk
- SE/6/6P/6S/6SP/7/7P/8/8P/X/iPad Capacity up by Magico Diag tool
- SE/6/6P/6S/6SP/7/7P/8 P/X/iPad hard drives damaged, To replace the hard disk chip,
- you need to use Magico Diag Tool to read and write hard disk data
- For iPad Mini 4, A1538, A1550
- For iPad Air 2 A1566, A1567
- For iPad 5 (2017) A1822
- For iPad 6 (2018) A1893
- For iPad Pro (10.5), A1701, A1709
- For iPad Pro 2 (12.9), A1670, A1671, A1821
How does it Work?
>>> IP8/8P/X Instruction for entering DFU mode:
1. Connect the device to a computer using a USB cable.
2. Quick-press the Volume Up button
3. Quick-press the Volume Down button
4. Hold down the Side button until the screen goes black, then hold down both the Side button and the Volume Down button.
5. After 5 seconds, release the Side button while continuing to hold down the Volume Down button. (If the Apple logo appears, the Side button was held down for too long.)
>>> IP7/7P Instruction for entering DFU mode:
1. Connect the device to a computer using a USB cable.
2. Hold down both the Side button and the Volume Down button.
3. After 8 seconds, release the Side button while continuing to hold down the Volume Down button. (If the Apple logo appears, the Side button was held down for too long.)
4. Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode. (If your device shows a screen telling you to connect the device to iTunes, retry these steps.)
>>> iPad, IP 6/6S/6SP and below, IP SE Instruction of entering DFU mode:
1. Connect the device to a computer using a USB cable.
2. Hold down both the Home button and Lock button.
3. After 8 seconds, release the Lock button while continuing to hold down the Home button. (If the Apple logo appears, the Lock button was held down for too long.)
4. Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode. (If your device shows a screen telling you to connect the device to iTunes, retry these steps.)
Notice: Macs and Macs running Windows are not currently supported! Please close antivirus software and iTunes before entering the purple screen. Please do not connect your computer to two mobile phones.iPhone 6sP purple screen will be black!
File Download:
README:
source https://www.softwarecrackguru.com/2022/07/i-lavender-os-key-for-iphone-ipad.html
Post a Comment for "i LAVENDER-OS KEY For iPhone & iPad Serial Port NAND Hard Disk Reading Writing Enter Purple Screen DFU Mode Tool"