Download Nothing Phone 2 or 1 EDL Firmware and Flash Tool [Latest Version]

Nothing Phone 2 EDL Firmware and Flash Tool -2023

This article gives steps on how to flash a Nothing Phone -2 firmware using the Nothing Phone 2 EDL Firmware and Flash Tool.

Disclaimer

The author disclaims all responsibility that may result from the use of this tool and provides it "as is." This tool only works with Global Variants of the Nothing Phone 2. Do not use it with IN or EEA variants, as this may brick your phone.

Compatibility

This tool supports both Nothing Phone 1 and Nothing Phone 2. However, the firmware file in the package is only for the Nothing Phone 2. Do not use this tool to flash the firmware on a Nothing Phone 1.

How to use

Download the file from Google Drive.
Extract the package. The password is "nothingphone2".
Open the NothingFlashTool.exe file and run it. Select your phone from the list.
Power off your Nothing Phone 2. Then, press and hold both the volume keys together to boot into EDL mode.
If your phone does not show up as "Qualcomm HS-USB 9008" in Device Manager, install the drivers. You can also use a modified cable.
Click on the "Start" button to flash the firmware. The phone will automatically reboot when the flashing is complete.

Credit:

The credit for this tool should go to both "mvikrant97" and XDA Developer.

"mvikrant97" is the user who created the tool and uploaded it to the XDA Developers forum. XDA Developers is a forum where Android enthusiasts can share information and help each other with their devices.

Conclusion

The Nothing Phone 2 EDL Firmware and Flash Tool setup instructions are provided in this article. To avoid any harm to your phone, please carefully follow these instructions.

source https://www.softwarecrackguru.com/2023/08/download-nothing-phone-2-or-1-edl.html