Download Xiaomi Redmi Note 11 NFC ENG
Official Engineering ROM is Now available for Xiaomi Redmi Note 11 NFC and You can download it below. by using this firmware you can solve all Network Related Issues with your Xiaomi Redmi Note 11 NFC such as No Network, IMEI loss, etc.
Redmi Note 11 mobile was launched on 26th January 2022. The phone comes with a 90 Hz refresh rate 6.43-inch touchscreen display offering a resolution of 1080x2400 pixels at a pixel density of 409 pixels per inch (ppi) and an aspect ratio of 20:9. Redmi Note 11 is powered by an octa-core Qualcomm Snapdragon 680 processor. It comes with 4GB, 6GB of RAM. The Redmi Note 11 runs Android 11 and is powered by a 5000mAh battery. The Redmi Note 11 supports proprietary fast charging.
As far as the cameras are concerned, the Redmi Note 11 on the rear packs a quad camera setup featuring a 50-megapixel (f/1.8) primary camera; an 8-megapixel (f/2.2) camera; a 2-megapixel (f/2.4) camera, and a 2-megapixel (f/2.4) camera. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 13-megapixel sensor with an f/2.4 aperture.
The Redmi Note 11 runs MIUI 13 is based on Android 11 and packs 64GB, 128GB of inbuilt storage that can be expanded via microSD card (up to 1000GB) with a dedicated slot. The Redmi Note 11 is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Redmi Note 11 measures 159.87 x 73.87 x 8.09mm (height x width x thickness) and weighs 179.00 grams. It was launched in Horizon Blue, Space Black, and Starburst White colors.
Connectivity options on the Redmi Note 11 include Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.00, Infrared, USB Type-C, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, compass/ magnetometer, gyroscope, proximity sensor, and fingerprint sensor.
As of 5th July 2022, Redmi Note 11 price in India starts at Rs. 12,999.
Features:
- -Dead Recovery Fix
- -Format FRP/Google Account Remove
- -Remove Password Pattern
- -Unbrick hang on logo Fix
- -Remove Virus
- -Fix LCD and Vibrant only
- -FIX IMEI_Baseband
- -Demo Remove
- -Global Rom Full Flash
- -Chinese To Global Convert
How To Use?
- Download and extract the ENG ROM package on the computer.
- After extracting the Redmi Note 11 NFC ENG ROM Package, you will be able to get the Qualcomm USB Driver,
- UMT QCFire, and ENG Flash File.
- Now, Install the Provided Qualcomm USB Driver on your Computer.
- Once you have successfully installed the HS USB Qdloader 9008 driver on the computer,
- you need to connect your Xiaomi device to the computer using the USB cable.
- Once your device is connected to the computer, you need to boot the device into the EDL Mode (Emergency Download Mode) (Short Test Point).
- Once your device is in EDL Mode,
- Launch the UMT Qcfire Tool and Load the ENG ROM File by using the rawprogram0.xml button.
- Once the ENG ROM is loaded, click on the Flash Button to begin the Flashing process.
- Once the Flashing process is completed, disconnect your Redmi Note 11 NFC ENG Firmware device from the computer and restart it.
Note:
- firmware only for testing purposes
- Must make a backup of Your ROM and Personal data.
- it will erase all your data Include Personal Information.
- Make sure Your Phone has at least 40-50% Charge to Prevent accidental shut down.
File Download:
README:
source https://www.softwarecrackguru.com/2022/07/download-xiaomi-redmi-note-11-nfc-eng.html
Post a Comment for "Download Xiaomi Redmi Note 11 NFC ENG (Engineering) ROM Firmware Flash File"